CHOPPED FIBER for RUBBER BELTS
| Model No. | ACF - 1.0mm(R) | ACF - 3.0mm(R) | VCF - 3.0mm(R) | PCF - 5.0mm(R) | |
|---|---|---|---|---|---|
| Specification | Fiber | p - ARAMID | p - ARAMID | PVA | PET |
| Resin | RFL | RFL | RFL | RFL | |
| Length | 1mm | 3mm | 3mm | 5mm | |
| Color | Brown | Brown | Brown | Brown | |
| Shape |
|
|
|
|
|
| Characteristic |
- Heat-Resistance - Wear-Resistance - Low Dimensional Change Rate - Excellent Dispersibility - High Adhesive Strength |
- Heat-Resistance - Wear-Resistance - Low Dimensional Change Rate - Excellent Dispersibility - High Adhesive Strength |
- Wear-Resistance - Low Dimensional Change Rate - Excellent Dispersibility - High Adhesive Strength |
- Excellent Dispersibility - High Adhesive Strength - Low Cost |
|
Remarks1) Chopped fibers for Rubber belt is normally chopped between 1~9mm length. 2) Detailed specification (fiber, coating resin, length or etc.) could be customized according to the client's requirement. |
|||||
CHOPPED FIBER for UHPC(Ultra High Performance Concrete)
| Model No. | SACF-19mm(R) | SVCF-13mm(Q) | ACF-25mm(R) | ACF-8.0mm(R) | |
|---|---|---|---|---|---|
| Specification | Fiber | Steel Fiber(SUS)+p-ARAMID | Steel Fiber(SUS)+PVA | p-ARAMID | p-ARAMID |
| Resin | RFL | PET | RFL | RFL | |
| Length | 19mm | 13mm | 25mm | 8mm | |
| Color | Brown | Black | Brown | Brown | |
| Shape |
|
|
|
|
|
| Characteristic |
- Heat-Resistance - Wear-Resistance - Low Dimensional Change Rate - Excellent Dispersibility - High Adhesive Strength |
- Heat-Resistance - Wear-Resistance - Low Dimensional Change Rate - Excellent Dispersibility - High Adhesive Strength |
- Heat-Resistance - Wear-Resistance - Low Dimensional Change Rate - Excellent Dispersibility - High Adhesive Strength |
- Heat-Resistance - Wear-Resistance - Low Dimensional Change Rate - Excellent Dispersibility - Usable for Plastering |
|
Remarks1) Chopped fibers for Super Concrete is normally chopped between 8~30mm length. 2) Detailed specification (fiber, coating resin, length or etc.) could be customized according to the client's requirement. |
|||||
CHOPPED FIBER for ENGINEERING PLASTIC(EP)
| Model No. | PPCF - 6.0mm(N) | ACF - 3.0mm(N) | CCF - 6.0mm(A) | LCF-4.0mm(S) | |
|---|---|---|---|---|---|
| Specification | Fiber | POLY PROPYLENE | p - ARAMID | CARBON FIBER | LYOCELL |
| Resin | NONE | NONE | AMIDE | SILANE | |
| Length | 6mm | 3mm | 6mm | 4mm | |
| Color | White | Yellow | Black | Ivory | |
| Shape |
|
|
|
|
|
| Characteristic |
- Chemical-Resistance - Usable for Weight Reduction |
- Heat-resistance - Wear-resistance - Low Dimensional Change Rate - Excellent Dispersibility - High Adhesive Strength |
- Heat-resistance - Wear-resistance - Low Dimensional Change Rate - Excellent Dispersibility - High Adhesive Strength |
- Excellent Dispersibility - High Adhesive Strength |
|
Remarks1) Chopped fibers for Engineering Plastic is normally chopped between 1~9mm length. 2) Detailed specification (fiber, coating resin, length or etc.) could be customized according to the client's requirement. |
|||||
